Featured: SCROLL TUTORIAL 1
This is a folder for all alt-history related tutorials, from creating maps and flags to what tools to use.
SCROLL TUTORIAL 2
Now you are ready to design your scroll paper:
1. make sure that the center dot you drew on the paper is on the BACK side of your scroll paper (this will help us mark where to put the ribbon later) and the sides you marked off for your template paper (if you're not going to print your design) is on the FRONT side.
2. once you have the sides marked on the paper go ahead and draw (or print) out your design. once this is done you'll be ready to put the ribbon on. (as you wil see in the next picture. And as you can see here i chose to draw my section of northern Htrae this time)
SCROLL TUTORIAL 1
okay so for those of you who are wondering, i decided to do a tutorial on the scrolls i make. this is my first tutorial, so bare with me. i decided to show it off picture by picture so i can enlarge the pcture better and you can see what it looks like. ^^
the sroll i'm making will be yet anothr htraen military map scroll, but this tutoral can be used to make any other kinds of scolls.
without further ado here it goes:
one (1) sheet of paper (news paper paper shown here)
two (2) sets of dowel rods (1/4 in, any length)
four (4) sets of dowel caps ( 1/4 in hole)
one (1) can of primer (base) paint (anything that can be used on wood)
one (1) can of secondary paint (anythinng that can be used on wood)
one (1) can of trim (optional, anything that can be used on
ten (10) inches of ribbon
hot glue gun
DAP contact cement
anything that can be used to produce the image you want (pens, printers ink, colored pencils, etc)
1.cut out (or s